Products
Zelsius C5 IUF
The zelsius® C5 IUF ultrasonic heat meter and cooling meter operates with an innovative ultrasonic technology, specially developed for domestic energy measurement and district heating.
Installation accessories for Cooling Heat meters
For professional installation and protection against manipulation. The wide variety of meter types and areas of application in the water meter area also requires a complete range in terms of accessories. That's why we stock the most popular accessory articles in the standard range – whether it's for professional installation in the various installation positions, for retrofitting or calibration replacement, or even to give the meters extra protection against tampering.
Energy calculator multidata WR3
The multidata WR3 energy calculator is an innovative split calculator for heat meters and cooling meters that can be combined with all current volumetric flow sensors - and also with ultrasonic and temperature sensors
Sonar - ultrasonic flow meter
The installation of an ultrasonic heat meter is frequently required where there are special technical or structural requirements. With its sonar ultrasonic volumetric flow sensor, ZENNER has an intelligent solution for these tasks in its portfolio
Residential Water Meter MNK
Multi-Jet Water Meter MNK is an MID-compliant Multi-Jet Residential Water Meter for service connection. Version MNK-N is retrofittable with pulser (Reed) or PDC module for remote readout via radio (wirless M-bus, LoRaWAN, SIGFOX)
Water Meter MTK-S 45° with inclined dial
MTK 45° water meter is a Multi-Jet impeller meter. The version MTK-N-S is retrofittable with pulser (reed) for remote readout. With its 45° inclined dial, the MTK 45° allows data reading from different angles
Mobile wireless M-bus radio system
The mobile wireles M-bus radio system especially for remote reading of water meters, heat meters and energy meters for heating and cooling according to the OMS (Open Metering System) specification.
Bulk water meter WPH-N-CC 90°
The WPH-N-CC 90° is a Woltman Bulk Water Meter with parallel turbine shaft for water up to 90° C. The WPH 90° is always used when high flow rates with a relative constant flow rate profile are to be measured.
Irrigation water meter Woltman WI-N
Woltman Irrigation Water Meter WI-N is a bulk water meter specially developed for use with polluted water. The meter easily takes a level of impurity of up to 30% in its stride, external filters can be inserted upstream of the water meter
Bulk water meter WPD / WPHD
WPD / WPHD is a smart Woltman bulk water meter for the measuring of high flow rates with parallel turbine shaft. It is prepared for remote reading via wired M-bus, wireless M-bus-radio, GSM, LPWAN (LoRaWAN, Sigfox) or electronic pulser.
Bulk water meter WSD / WSDE
WSD is a Woltman water meter with perpendicular turbine shafts and is optimally prepared for remote reading via M-Bus, radio (wireless M-bus, LPWAN, LoRaWAN, SIGFOX), GSM or pulser.
Woltman well water meter WB-N
Woltman Well Water meter is a bulk water meter with a housing and counter specially developed for use in multiple well systems and can be installed as wellheads in place of a 90° elbow in accordance with DIN 28537 and DIN 28637.
Atmos diaphragm gas meter G1.6S, G2.5S, G4S
The Atmos® diaphragm meter is available in sizes G1,6 and also G2,5 and G4. The meter is characterized by precise measurements, a constant measuring stability, a long life and high reliability.
Atmos® IQ IC-Card diaphragm gas meter IG1.6S, IG2.5S, IG4S
The Atmos® IQ diaphragm gas meters are credit gas meters and use an encrypted IC card as a data carrier. The IC-Card diaphragm gas meter is available in sizes IG1,6S and also IG2,5S and IG4S.
Rotary Gas Meters
Rotary gas meters are used when a high accuracy of the results is required in critical conditions such as at low or irregular gas flow. ZENNER Rotary Gas Meters are available in sizes from DN 25 to DN 250.
AMR-System for Gas Meters
The Automated Meter Reading System (AMR-System) for gas meters is an optimal solution for all gas suppliers. It enables improved meter management and the implementation of a uniform pricing system
Gas Detectors
Early warning system for toxic and combustible gasesGas detectors like the "Gas Alarm" from ZENNER can save lives. The threat of a gas accident can be avoided by installing a gas detector in the apartment. Gas detectors are early warning systems.
The Gas Alarm initiates a visual and audible alarm when escaping gas.
The gas detector "Gas Alarm" from Zenner detects combustible and toxic gases such as natural gas,biogas, city gas, carbon monoxide (CO detectors), hydrogen gas, and other gases
Software-Solutions by ZENNER
ZENNER provides software solutions for activating and reading remote read-out systems and for device configuration. Here, the range extends from macro packages for MS Excel, right up to the new modular GMM package, the Global Meter Manager.
Metering System Solution MSS
MSS consists of software components, each of them designed to fulfil certain tasks within automated meter readout and meter configuration for the metering products of ZENNER
M-bus level converter
With the m-bus level converter (also nemad M-bus master) the data of all measuring devices in an M-bus system can be read out. The M-bus level converter represents the central metering point.